EasyManuals Logo

Crouzet CTR48 Series User Manual

Crouzet CTR48 Series
Go to English
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
16
english
8.5 Signal and control inputs
Polarity: programmable NPN/PNP
for all inputs in common
Input resistance 5 k
Pulse shape any
HTL level Low: 0 ... 2 VDC
High: 8 ... 30 VDC
Minimum pulse length of the Reset input:
6 ms
Minimum pulse length of the Control inputs:
10 ms
8.6 Outputs
Output 1
Relay with make contact
programmable as NC or NO
Switching voltage max. 250 V AC/30 V DC
min. 5 V AC/V DC
Switching current max. 5 A AC/A DC
min. 10 mA DC
Switching capacity max. 750 VA/90 W
Mechanical service life (switching cycles)
2x10
7
N° of switching cycles at 5 A/ 250 V AC
5x10
4
N° of switching cycles at 5 A/ 30 V DC
5x10
4
and PNP Transistor output
DC power supply 10-30 V DC, max. 30mA
AC power supply 24 V DC -20/+15%,
max. 30mA
Output 2
Relay with changeover contact
Switching voltage max. 250 V AC/30 VDC
min. 5 V AC/V DC
Switching current max. 5 A AC/A DC
min. 10 mA DC
Switching capacity max. 750 VA/ 90 W
Mechanical service life (switching cycles)
20x10
6
N° of switching cycles at 5 A/250 V AC
5x10
4
N° of switching cycles at 5 A/30 V DC
5x10
4
and PNP Transistor output
DC power supply 10-30 V DC, max. 30mA
AC power supply 24 V DC -20/+15%,
max. 30mA
8. Technical data
8.1 General data
Display LCD positive or negative,
backlit 2 x 6 digits
Digit height upper line 9 mm
lower line 7 mm
special characters 2 mm
Overflow/ Blinking, 1 s
Underflow Up to 1 decade, the
counter loses no pulses
Data retention > 10 years, EEPROM
Operation 8 keys
8.2 Pulse counter
Count frequency max. 40 kHz (see section
11. Frequencies)
Response time of the outputs:
Relay < 13 ms
Transistor < 1 ms
8.3 Tacho/Frequency meter
Frequency range 0,01 Hz to 40 kHz (see
section 11. Frequencies)
Measuring 76.3 Hz Time interval
principle (period measurement)
> 76.3 Hz Gate time
Gate time approx. 13,1ms
Measuring error < 0.1% per channel
Response time of the outputs:
1-channel operation
< 100 ms @ 40 kHz
2-channel operation
< 150 ms @ 40 kHz
8.4 Timer
Seconds 0.001 s ... 999 999 s
Minutes 0.001 min...999 999min
Hours 0.001 h .. 999 999 h
h.min.s 00h.00min.01s ...
99h.59min.59s
Min. time measurable
500µs
Measuring error < 100 ppm
Response time of the outputs:
Relay < 13 ms
Transistor < 1 ms

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Crouzet CTR48 Series and is the answer not in the manual?

Crouzet CTR48 Series Specifications

General IconGeneral
BrandCrouzet
ModelCTR48 Series
CategoryCash Counter
LanguageEnglish

Related product manuals