thecrowgroup.com Page | 13
Communication
___________________________________________________________________________________________________________
Default remote access password is "12345678", it is recommended to modify the password.
Activate communication paths configured in "Report Channels".
TCP/IP:
By default, the DHCP is active; the router will assign an internal IP to the SHEPHERD™. You can assign a dedicated IP address
to the panel by filling its static IP, Subnet mask and its Gateway (address of the router).
GSM IP:
This option activates the GPRS-3G-4G. Fill in the APN of your provider.
GSM SMS:
This option activates SMS features if selected in "Report Channels".
Wi-Fi:
The SHEPHERD™ panel can connect to the router in Wi-Fi mode.
Fill in the network SSID (name of the wireless network), Security type and network password.
DECT:
Pairing of DECT devices in communication->DECT level and go to "Zones" or "Outputs" to assign paired devices.
RF Repeater:
The SHEPHERD™ panel can support wireless repeaters. Follow the repeater instructions for learning Repeater device.
RF
In case of jamming, you can adjust manually the RF Channel frequency range from 1 to 5.
Miscellaneous
_______________________________________________________________________________________
There are panel options such as:
Installer code
Duress digit
License time
Timers and Delays
User Options
Chime Control
!!!! Find descriptions of above options and program parameters in Program Definitions Description chapter in this
manual.
To Next Page
Loading...