Crow Shepherd - Appendix 1: Installer Event Log Messages

thecrowgroup.com Page | 69
Appendix 1: Installer Event log messages
AC Fail Loss of AC power from the main panel
AC Restored
AC power restore on main panel
%O activated by %U
Output number %d activated by user number %U
%O activated by remote control
Output number %d activated remote control
*%Z Alarm in %A Zone number %Z Alarm in Area number %A
Area Edited in %A by %S1
Area number %A label was Edited by Cloud user %S1
*%A Arm Failed Area number %A arm operation failed
*%A Armed by Keypad %d Area number %A armed via Keypad number %d
*%A Armed by Time Zone %d Area number %A armed via Time zone number %d
*%A Arm Fail by Time Zone %d Area number %A Arm fail by time zone number %d
Automatic Test Connect Automatic communication test process finish successfully.
*%Z Bypass
Zone number %Z bypassed
*%Z Bypass Restore
Zone number %Z bypass restore
%U Bypass all Pendant Battery Low
User number %U is Bypassed all Pendants that at Battery Low
status
Code Attempts Alarm False code alarm
Code Attempts Restore False code alarm restore
Communication (%Y) Fail Communication method (IP/ GPRS/Wi-Fi) (%Y) Fail
Communication (%Y) Restore Communication method restore on main panel
Control Panel Added to User %S1, By %S2 Control Panel Added to Cloud user %S1 By Cloud user %S2
Control Panel Deleted from User %S1, By %S2 Control Panel Cloud user %S1 deleted By Cloud user %S2
Control Panel User Edited for %S1, By %S2 Control Panel Cloud user %S1 edited By Cloud user %S2
%O deactivated by keypad %d Output number %O deactivated by keypad number %d
%O deactivated by remote control Output number %O deactivated by remote control
DECT Delete Headsets by %S1 DECT Headset device deleted by Cloud user %S1
DECT Pair Canceled by %S1 DECT device pair cancel by Cloud user %S1
DECT Pair Started by %S1 DECT device pair process started by Cloud user %S1
%A Delinquency Alarm Delinquency alarm in Area number %A
%A Delinquency Restore Delinquency report Area number %A Restore
*%A Disarmed by %U
Area number %A disarmed by User number %U
*%A Disarmed by Keypad %d
Area number %A disarmed by keypad number %d
*%A Disarmed by Keyswitch %d
Area number %A disarmed by Keyswitch number %d
*%A Disarmed by Time Zone %d Area number %A disarmed by time zone number %d
%U Duress Alarm
Duress Alarm from User Number %U
Duress Alarm Reset
Duress Alarm restored
Enter Installer Mode
Entering installer programing from installer web interface or
installer app.