Crow Shepherd - Dect

thecrowgroup.com Page | 53
DECT
What is DECT ULE?
ULE addresses Ultra-Low Energy application requirements by introducing optimized communication methods. Identified with
low power consumption, low latency, long range, moderate data rate and value-added complementary voice capabilities,
ULE is the best-of-class technology, which represents the next evolution in home networking.
ULE is based on DECT (Digital Enhanced Cordless Telecommunications) which is the de-facto standard for residential and
business cordless phone communications worldwide.
DECT ULE is an SW protocol extension of the standard DECT, These devices can be easily support DECT ULE for Home
Automation and Security/Monitoring.
DECT ULE: the perfect combination of long battery lifetime, high data rate, low cost and long transmission range.
Frequency Allocations:
• Europe: 1880-1900 MHz
• China: 1900-1920 MHz
• Japan: 1893-1906 MHz
• Latin America: 1910-1930 MHz
• US & Canada: 1920-1930 MHz
Parameter Description Default Configuration
DECT Enabled If this option selected, the DECT Module Activated. Enabled
DECT Contact Number
Phone numbers of the contact persons called from the Audio
Panic DECT button
Empty
Learn DECT Device
DECT detector must be enroll into the panel before it can be
use.
Click this button to start DECT pairing process
-
Delete DECT HAN Device
Removing DECT device from the system.
Select the device you want to delete and press the button
Confirm deletion and save the configuration
ID of the DECT device
Delete DECT HS Device Click this button to delete DECT Panic Button Empty
DECT PIN Code
GSM pin code number according GSM network requirements,
up to 8 digits length.
Empty
Crow Electronic Engineering Ltd. Is an active contributor to
the ULE Alliance with a full range of DECT ULE products