Crow Shepherd - Add Keypad and Communication; Add Keypad Process; Communication Settings

thecrowgroup.com Page | 52
GSM
Parameter Description Default Configuration
GSM IP Enabled
If this option is on, the GPRS/3G Data is Enabled.
This communication method suits for Data connection to
Monitoring Station or Server.
Enabled
GSM SMS Enabled If this option is on, the GSM SMS is Enabled. Enabled
PIN Code
GSM PIN code number according to GSM network requirements,
up to 8 digits length.
No PIN Code
GSM User GPRS user according to APN GSM network requirements. Empty
GSM Password GPRS Password according to APN GSM network requirements. Empty
GSM APN GPRS APN access point name according to your cellular provider. "internet"
USSD Code
Unstructured Supplementary Service Data (USSD) is a protocol
used by GSM cellular telephones to communicate with the
service provider's computers, using for prepaid callback and
mobile-money services. The parameter contains 3 decimal
digits.
0
System Language Used to change the language of SMS messages
Voice Language Used to change the language of Voice messages
Low RSSI alert
(-110 ÷ -50)
Low RSSI Alert
RSSI measures the strength of a radio signal. Any RSSI value
lower than the programmed RSSI value will alert about poor
signal strength.
Wi-Fi
Parameter Description Default Configuration
Wi-Fi Enabled If this option selected, the Wi-Fi connection is Enable. Disabled
SSID The wireless network name Empty
Security Type Select the security type of your Wi-Fi network "Open" – No Encryption
Password Password of the wireless network you want to connect to.
Empty