Crow Shepherd - Miscellaneous and Voice Device Commands; Miscellaneous and Chime Control; Voice Device Commands

thecrowgroup.com Page | 60
Voice device (DECT Device)
Advanced Configuration
Parameter Description Default Configuration
Name Enter voice device name
Add Voice Device
Use this Button to learn voice device into the system but
not before pairing the DECT Voice device in Communication
level.
Empty
Is Active Panic event can be enable or disable from Voice device
Enable
Emergency alarm
Voce device generates Emergency Alarm instead Panic
Alarm on pressing the panic button.
Area Assignment
Parameter Description Default Configuration
Voice Device is assigned to
areas
Voice device can be assigned to Area 1-4 or multiple areas
Area 1
Output Assignment
Parameter Description Default Configuration
Voice device is assigned to
outputs
Voice device can be assigned to an output or multiple
outputs
Note: This option is linked
to selection of the
commands Can Toggle
outputs option in order to
activate/deactivate an
output
Commands
Parameter Description Default Configuration
Command disable
Commands , ARM , STAY ARMED and Can Toggle outputs
are disabled
Can ARM
Voice device can ARM area or multiple areas that assigned
to the voice device , area or multiple areas can be armed by
pressing and holding the disconnect button of the voice
device for at least 5 sec
Can Stay ARM
Voice device can STAY ARM area or multiple areas that
assigned to voice device , area or multiple areas can be
armed by pressing and holding the disconnect button of
the voice device for at least 5 sec
Can Toggle outputs
Voice device can turn on/off an output that assigned to
voice device , output or multiple outputs can be turn on ot
off by pressing and holding the disconnect button of the
voice device for at least 5 sec