Crow Shepherd - User Type; Area Assignment; Keypad Assignment

thecrowgroup.com Page | 21
User Type
Parameter Description Default Configuration
Keypad User
Users assigned to keypads; User Codes used to
Arm/Disarm all or part of the alarm system.
Disable
Pendant User
Radio keys can be used to Arm/Disarm all or part of the
alarm or they can operate outputs directly', Unlike user
codes, a radio key cannot be assigned to a keypad so if a
radio key is assigned to more than one output and the
radio key is operated, all of the outputs assigned to the
radio key will turn on
Disable
Access Tag User
Access Tag can be used to Arm/Disarm all or part of the
alarm or it can be used to operate outputs for access
control purposes
Disable
Remote Control User
This option defines user rights for remote control of the
control panel.
Disable
User 1 is enable by default
Area Assignment
Parameter Description Default Configuration
User Assigned To Area
Codes uses to Arm/Disarm all or part of the alarm system
or they use to operate outputs for access control
purposes.
All users assigned to Area 1
Keypad Assignment
Parameter Description Default Configuration
User can operate at keypad
Any user assigned to operate at certain Keypads. This
option controls a code that can Arm/Disarm from certain
keypads.