thecrowgroup.com Page | 20
Program Definitions description
User Types ,Code, Pendants,Tag
Click on the user to display its available options.
User Settings
Parameter Description Default Configuration
Enter name of user up to 16 characters
User Code Enter user code (4-8 digits)
This means that User 1
automatically gets the code 1234
Phone
Enter user’s Phone number ( creating full duplex
call by pressing the call button of Voice Device)
Empty
User Options
Parameter Description Default Configuration
User code can arm User can arm all areas that assigned to user Enable
User code can arm stay User can arm Stay Mode for all areas that assigned to user Disable
User code can disarm User can disarm all areas that assigned to user Enable
User code can disarm stay User can disarm Stay Mode for all areas that assigned to user Enable
Security Guard User
User can arm all areas that assigned to user, but may only
disarm if the panel is currently armed and in the alarm state
Disable
Latchkey Mode User
The User will arm the alarm in Latchkey Mode. If a user with this
option on disarms the alarm no disarm report will be sent via
the dialer. If Latchkey Mode is armed and a user with this option
off disarms the alarm a disarm report will be sent to alert
parents when their children have returned home. Reporting of
Latchkey Disarm is enabled at Reporting Options.
Disable
Code required after
access tag
After presenting access tag user has to enter a valid user code Disable
User Emergency Alarm
When this option is checked / activated, the panic event is
replaced by an emergency event and also the CID to the
monitoring statin alarm is different
CID 101
To Next Page
Loading...