thecrowgroup.com Page | 35
PIR Camera -SHWireless
LED(s) state: Activation or not of the LED indicators
Pet Immunity: Activation of the up to 25Kg Pet immunity
Number of pulses: Pulse count for each motion detection (1,2 or3)
Sensitivity: Sensitivity of the PYRO sensor
Picts per set: Number of pictures sent in case of alarm event
JPEG Quality level: Quality of the picture (from 20% to 90%)
Picture resolution & color: Selection between: QVGA B&W (320x240), VGA
B&W (640x480), QVGA Color (320x240), VGA Color (640x480)
Camera State:
Pulse Direction Mode:
Infra LED:
Conf Time B/W 1
st
and 2
nd
Pulses:
Time B/W 1
st
and 2
nd
Pulses:
Time B/W 2
st
and 3
nd
Pulses:
JPEG mode: Regular or Differential (Video Motion Detection)
Pict Rate: Time laps between alarm pictures
Diff JPEG ratio: Sensitivity of the Video Motion Detection (High or Low)
Hold off (sec): Wait time between 2 detections and pictures (between 30 to
120 sec)
Contrast enhancement: Contrast emphasis of the picture
Sharpness enhancement: Sharpness of the picture
To Next Page
Loading...