19
»
There are 2 part of function menu: part 1, Menu No. 1-10
channel function menu. part 2 Menu No. 11-20 function menu.
Part 1 will automatically hide in channel mode by program
software.
7.07 CTCSS Scan
Separately short press [FUN] key and [SOL] key to enter CTCSS/
DCS encode/decode menu, repeatedly short press [SQL] key until
LCD displays CT, short press [SCA] key can enter CTCSS scan
mode. Short press [UP] or [DN] key can change the scan direction,
Once finding a matching CTCSS signaling, it will stop for 5S then
scan again. Press any key to exit.
7.08 DCS Scan
Separately short press [FUN] key and [SQL] key to enter CTCSS/
DCS encode/decode menu, repeatedly short press [SQL] key until
LCD displays DCS, short press [SCA] key to enter DCS scan mode.
Short press [UP] or [DN] key can change the scan direction. Once
nding a matching DCS signaling, it will stop for 5S then scan again.
Press any key to exit.
7.09 Keypad Lockout
Avoiding unintentional operation, this function will lock the keys
except [PTT] key and [FUN] key.
1. Short press [FUN] key the LCD displays F icon, press [VOL] key
again the LCD displays Lock means the keypad is locked.
2. Repeate above operation, when Lock icon disappears, means the
keypad is unlocked.
7.10 Function Menu
1. Hold [FUN] key for over 2S to enter function menu.
2. Short press [UP]/[DN] or turn VOL knob to switch menu option.
3. Short press [VOL] key to enter 2nd level menu setup
4. Short press [UP]/[DN] key or turn VOL knob to choose current
setting.
5. Short press any key to store and exit.
To Next Page
Loading...
