CRT Space-U - Talk Around; Reverse Frequency; Tx off; Editing Channel Name

21
7.16 TX OFF
Enter No.06 function menu , the LCD displays:"TX".
This function use to disable the transmitting for current channel.
ON: TX allowed, press [PTT] to transmit.
OFF: TX not allowed, press [PTT] will emit a wrong report.
Default:
ON.
7.15 Editing Channel Name
Enter No.05 function menu , the LCD displays "NAME".
1. Press [UP]/[DN] or turn VOL knob to choose character for present
cursor location.
2. Press [V/M] key to conrm and move to next character edit.
3. Press [FUN] key to return to last character edit.
7.17 Reverse Frequency
Enter No.07 function menu , the LCD display "REV".
When turn on this function, the TX frequency turns to RX frequency &
RX frequency changes to TX frequency. The signaling will reverse if
CTCSS/DCS signaling existed in this channel.
ON: Turn on reverse function
OFF: Turn off reverse function
Default: OFF.
7.18 Talk Around
Enter No.08 function menu , the LCD displays "TALK".
This function enable direct communication with other radios in case
the repeater is not activated or when out of the repeater range.
The transceiver will transmit by RX frequency with its CTCSS/DCS
signaling.
ON: Turn on talk around function
OFF: Turn off talk around function
Default: OFF.
»
In Frequency (VFO) mode ,this function will be auto-hidden.
(only for amateur version)
(only in version amateur radio)