SG250 Ownerās and Service Manual
www.CSCMotorcycles.com
35
This is the rounded edge.
To remove the rest of the clutch components, it is necessary
to remove the centrifugal oil cleaner. Unscrew the three
Phillips head screws on the centrifugal oil cleaner.
Remove the centrifugal oil cleaner cover.
On a motorcycle with much higher mileage, packed sludge
will accumulate around the inner periphery of the centrifugal
oil cleaner in the areas shown by the red arrows
below. Scrape this sludge out and wipe the interior of the
centrifugal oil cleaner clean.
To Next Page
Loading...
