CUDA 2848 - Spray Arm Exploded View

8.930-369.0 • 2848 • Rev. 4/13a
OPERATOR’S MANUAL
PARTS WASHER
36
SPRAY ARM EXPLODED VIEW
89303690-12
SPRAY ARM EXPLODED VIEW PARTS LIST
ITEM PART NO. DESCRIPTION QTY
1 8.713-136.0 Union, 1-1/2" Black 1
2 8.735-006.0 Nipple, 1-1/2" x 6.75" LG
SCH 40 1
3 8.706-195.0 Elbow, 90° 1-1/2" Black 1
4 8.915-367.0 Lower Assy, Spray Manifold
2848 1
8.915-442.0 Assy, Lower Manifold 2848
w/12" Ext 1
5 8.706-219.0 Tee, 1-1/2", Female, Pipe,
Black 1
6 8.915-369.0 Nipple, 1-1/2" x 23" LG
SCH 40 1
8.915-445.0 Pipe, Upper 2848 w/12" Ext 1
7 8.712-996.0 Elbow, 90° 1-1/2" x 1"
Reducing Black 1
8 8.915-370.0 Pipe, Upper Spray Manifold 1
7
8
10
9
6
5
14
13
16
12
11
9
10
1
2
3
4
18
17
15
Rotate Each
Nozzle
Approx.
3° From
Center Line
Of Pipe
Align Notch In
Each Spray Nozzle
With The Center
Of The Turntable
SIDE
VIEW
TOP
VIEW
ITEM PART NO. DESCRIPTION QTY
9 8.706-081.0 Cap, Pipe 1 NPT 150WP
Non PL 2
10 8.712-973.0 Nozzle, 50° #6 18
8.749-193.0 Nozzle, 50° #5 w/12" Ext 22
11 8.915-217.0 Assy, Swing Arm, Spray Arm 1
8.915-444.0 Assy, Swing Down Spray Arm
2848 w/12" Ext 1
12 8.713-239.0 Swivel, Bushing HEX 1
13 9.804-367.0 O-Ring, Swivel #125 BUNA
1.299" ID x 1.505" OD 2
14 8.724-360.0 Pin, Roll 3/16" x 1-5/8" 1
15 9.802-779.0 Nut, 3/8", ESNA, NC 2
16 8.713-187.0 Rubber Bumper, 1/4" Stem 1
17 9.802-773.0 Nut, 1/4", ESNA, NC 1
18 8.718-965.0 Washer, 1/4", FLAT, SAE, SS 1
19 9.802-807.0 Washer, 3/8" SAE Flat 4
19
19
19