Curtis 1220 User Manual

40
Curtis 1220 Manual, Rev. C
Table 4 TROUBLESHOOTING CHART, cont’d
FLASH CLEAR STEER TRACTION
CODE
NAME POSSIBLE CAUSE
CONDITION FAULT ACTION FAULT ACTION
6 — DIAGNOSTICS & TROUBLESHOOTING
63 Communication 1. Broken wiring on Rx (J1-8). Receive the Warning and Speed
Lost 2. Programmer (1313/1314) is Spyglass maximizing reduced.
connecting with traction controller. message. steering angle
output voltage.
71 Software 1. Software defective. Cycle KSI. Shutdown. Stop.
Fault 2. Controller defective.
73 Following 1. Incorrect parameter settings. Cycle KSI. Warning then Stop.
Error 2. Position feedback device defective. Shutdown.
3. Steer motor defective.
75 Parameter 1. Parameter settings are in conict Cycle KSI. Shutdown. Stop.
Conflict with each other.

Curtis 1220 Specifications

General

Brand	Curtis
Model	1220
Category	Controller
Language	English