Curtis 1239E - APPENDIX D

APPENDIX C
Curtis 1239E-1269E Manual, os 37.0 RevA – May 2021
Return to TOC
pg. 154
APPENDIX C
PROGRAMMING DEVICES
Curtis programmers provide programming, diagnostic, and test capabilities for the 1239E/1269E
controller. e power for operating the programmer is supplied by the host controller via a 4-pin
connector. When the programmer powers up, it gathers information from the controller.
Two types of programming devices are available: the 1314 PC Programming Station and the 1313
handheld programmer. The PC Programming Station has the advantage of a large, easily read
computer/laptop screen; on the other hand, the handheld programmer (with its 45×60mm screen)
has the advantage of being more portable and hence convenient for making adjustments in the eld.
Both programmers are available in User, Service, Dealer, and OEM versions. Each programmer can
perform the actions available at its own level and the levels below that — a User-access programmer
can operate at only the User level, whereas an OEM programmer has full access.
PC PROGRAMMING STATION (1314)
e Programming Station is an MS-Windows 32-bit application that runs on a standard Windows
PC. Instructions for using the Programming Station are included with the soware. In addition,
the Curtis 1309 Interface box with a computer-side USB and controller-side 4-pin serial Molex
connection is required for the 1314 PC Programmer.
HANDHELD PROGRAMMER (1313)
e 1313 handheld programmer is functionally equivalent to the PC Programming Station; operating
instructions are provided in the 1313 manual.
is programmer replaces the 1311, an earlier model with fewer functions.
PROGRAMMER FUNCTIONS
Programmer functions include:
Parameter adjustment — provides access to the individual programmable parameters.
Monitoring — presents real-time values during vehicle operation; these include all inputs and outputs.
Diagnostics and troubleshooting — presents diagnostic information, and also a means to clear the
fault history le.
Programming — allows the user to save/restore custom parameter settings.
Favorites — allows the user to create shortcuts to the frequently-used adjustable parameters and
monitor variables (1313 only).