Curtis 1239E - THROTTLE MENU

Return to TOC Curtis 1239E-1269E Manual, os 37.0 RevA – May 2021
4 — PROGRAMMABLE PARAMETERS
pg. 45
MOTOR
RPM +
Neutral Taper Speed
MOTOR
RPM -
Creep Torque
CURRENT +
CURRENT -
In torque mode, the throttle command
continuously interpolates between the
Throttle=0% and Throttle=100% curves
to produce the torque command.
Throttle=100% Curve
Neutral Braking x Regen Current Limit
Drive Current LimitRegen Current Limit
Throttle=0% Curve
Forward/Back
Full Restraint Speed
TIME
TORQUE
Gear Soften = 0%
= 25%
= 50%
= 75%
= 100%
MOTOR RPM +
The Brake Taper Speed setting
determines where these knees occur.
MOTOR RPM -
MAXIMUM
BRAKING
CURRENT
(percent)
100
0
0
Figure 12
rottle mapping (torque control mode).
Figure 13
Eect of Gear Soen parameter
(torque control mode).
Figure 14
Eect of Brake Taper Speed
parameter (torque control mode).