Curtis 1239E - MOTOR TUNING; FOLLOWING ERROR - SPEED MODE

Return to TOC Curtis 1239E-1269E Manual, os 37.0 RevA – May 2021
5 — MONITOR MENU
pg. 79
Monitor Menu: OUTPUTS
VARIABLE DISPLAY RANGE DESCRIPTION
Analog Out
Analog_Output
0x321D 0x00
0.00 – 10.00 V
0 – 32767
Voltage at Analog output (pin 30).
Digital Out 6
|Dig6_Output
|System_Flags1 [Bit 3]
0x322B 0x00
On / Off
On / Off
Digital Out 6 output on or off (pin 19).
Digital Out 7
|Dig7_Output
|System_Flags1 [Bit 4]
0x322B 0x00
On / Off
On / Off
Digital Out 7 output on or off (pin 20).
Driver 1 PWM
PWM1_Output
0x321F 0x00
0 – 100%
0 – 32767
Driver 1 PWM output (pin 6).
Driver 2 PWM
PWM2_Output
0x3220 0x00
0 – 100%
0 – 32767
Driver 2 PWM output (pin 5).
Driver 3 PWM
PWM3_Output
0x3221 0x00
0 – 100%
0 – 32767
Driver 3 PWM output (pin 4).
Driver 4 PWM
PWM4_Output
0x3222 0x00
0 – 100%
0 – 32767
Driver 4 PWM output (pin 3).
PD PWM
PD_Output
0x321E 0x00
0 – 100%
0 – 32767
Proportional driver PWM output (pin 2).
PD Current
PD_Current
0x321C 0x00
0.00 – 2.00 A
0 – 607
Current at proportional driver (pin 2).
5 Volts
Five_Volts_Output
0x3202 0x00
0.00 – 6.25 V
0 – 1023
Voltage at +5V output (pin 26).
12 Volts
Twelve_Volts_Output
0x3522 0x00
0.00 – 12.00 V
0 – 768
Voltage at +12V output (pin 25).
Ext Supply Current
Ext_Supply_Current
0x3229 0x00
0 – 200 mA
0 – 800
Combined current of the external +12V and +5V voltage supplies (pins 25
and 26).
Pot Low
Pot_Low_Output
0x3203 0x00
0.00 – 6.25 V
0 – 1023
Voltage at pot low (pin 18).