2. Mute: To mute your side of the conversation, select ‘Mute’
so it shows a green bar. To turn it off, select it again so the
bar is unlled. The status bar will display this icon when
Mute is on.
3. Hold: To put an active call on hold, select ‘Hold’ so it shows a
green bar. To resume the call, or take the call off hold, select
it again so the bar is unlled. If you take a call while already
on a call, the rst call will be placed on hold automatically.
The status bar will display this icon when a call is on hold.
4. Add call: If you need to enter numbers while on a call,
touch ‘Add call’.
5. Incoming call: During call in progress, if you are on a call
(“call in progress”) when another call comes in (“incoming
call”), you have a few choices:
• Answer the incoming call and place the call in pro-
gress on hold. To switch calls at any time, touch ‘Swap calls’.
• If you don’t want to interrupt your call in progress,
then touch ‘END’.
• If you have one call in progress and one caller on
hold, to end both calls, touch ‘End all’.
6. While on a call, you can conference up to six callers, count-
ing yourself. Note that you can also have an additional caller
on hold during a conference call, regardless of how many
participants are on the conference.
NOTE: Whether the group call function can be used depends
on whether the network operator supports and provides such
function as well as whether you have applied for such function.
Please contact network operator for details
75
To Next Page
Loading...
Need help?
General