CHANGING A PASSWORD
It is possible to modify the passwords attributed by default.
Certain users can do it for themselves, others not. In order to know the
authorizations, see Table of users, access and passwords on page 91.
To change a password:
Press the
keys du m.
A pop-up is di
Press the
ring two seconds minimu
splayed.
key.
The message LEVEL ? appears.
Type the level number y to n.
The message VALUE ? appears.
Introduce th ng to the requested level and
validate with the
ou want log i
e password correspondi
key.
Then press the
keys during two seconds minimum.
A pop-up is displayed.
Press the
key.
The message LEVEL ? appears.
Program the level on which you want to modify the password.
The message IGNORE appears if the requested level is superior to the
"logged" level, in the contrary, the message VALUE ? appears.
Introduce the desired new password and validate with the
key.
The message CONFIRM appears.
Introduce the new password again and validate with
.
If the 2 registered passwords are identical, the message OK is
displayed.
If the 2 registered passwords are different, the user is invited to
introduce the 2 passwords again, the message VALUE is displayed.
At the end of the intervention, don't forget to pass to level 0 in order
to leave the current level.
PAGE 94 USER GUIDE DNC 600S
To Next Page
Loading...
