APPENDIX B: USER INTERFACE
USING THE SCREEN
The screen displays the products, tools and machine parameters as well as all
other useful information for programming and machine work.
The keys situated on the front of the DNC are used for selecting the screen
pages and introducing data.
A cursor indicates where the user can intervene.
On all pages, when first displayed the cursor is located on the programmable
field on which it was placed during the last intervention on that page.
The cursor can be moved to the previous or following field by pressing the
or key.
Faster Regardless of the cursor position on the page, pressing the
and the
keys simultaneously moves the cursor to the first programmable field
of the page.
USING THE KEYBOARD
The keyboard is divided into six zones:
Numerical keyboard
Screen page selection keys
Working mode zone
The commands
The cursor keys
The manual mode keys
NUMERICAL KEYBOARD
The numerical keys as well as the and keys are used to
introduce numbers or values into the different fields.
PAGE 24 USER GUIDE DNC 600S
To Next Page
Loading...