APPENDIX J: PROTECTING THE ACCESS LEVELS
GENERAL INFORMATION
Depending on the version, the DN 00S r can not
4 tions physi y.
However the protection levels 0-1-2 and 3 still exist.
For the case where the physical key doesn' t, the acc
password.
CAUTION
C 6 can o be equipped with a
-posi cal ke
t exis ess is made by
: these passwords will be reset default
initialization of the machine param rs (817 on INIT pa
Mach Par = 1).
T in this man e always w speak f a (virtual)
e ey in posi ".
vels T exist 4 acc vels, 0 to 3
0 = Programming prohibited.
1 = Creation, correction, modification, saving, deleting, transfer of one
(or more) product(s).
eters.
Access These levels are accessed by pressing the
in the values at each
ge and Choice Init ete
hus,
.g.: "K
ual w
tion 3
ill o key position like
Le here ess le .
2 = Creation, correction, modification, saving, deleting, transfer of the
tools.
3 = Programming, modification and transfer of the machine param
keys during two seconds
minimum.
A pop-up is displayed.
Press the
or keys.
The key position is displaye ber on the upper right part of the
screen (after the interactive field).
When passing to a higher, not authorized level, a password modification will
be requested.
When the password has been introduced, you can "navigate" levels inferior
or equal to the authorized one without reintroducing the password.
Passing to level 0 resets password validity.
Users A number of different users are predefined. A user is not a physical person in
particular, but can be e.g. all the operators having the authorization to work
on the machine.
Each predefined user possesses his own password and a maximum level
which he can reach. See further under Table of users, access and passwords.
Password Certain users can modify their own password. For the others, the password
can only be changed by a user having a superior access.
Loss of the password In case of loss of the password, a user of a superior level has to reprogram
the password.
d as a num
PAGE 90 USER GUIDE DNC 600S
To Next Page
Loading...