INTERACTIVE MESSAGES
- has not been initialized
n" the internal memory by placing the cursor on
the P field, entering 999 and pressing the
CASSETTE
Indicates that the "cassette" (internal memory)
- is polluted
- has changed the format (e.g. by changing the software
version).
Just "clea
key.
COMPLETE
Displayed in
mode when the buffer is full. (No
COPIED
more space for an additional sequence).
Displayed in
mode when a new sequence has been
singcreated at the end of the program u the
key.
DELETED
Displayed in
mode when a product or sequence is
deleted using the
key.
END
Displayed in
or mode, indicates the last
xes
Err - FC
rror.
-of-range values.
When security measures are in force (in other words when
sequence of the program.
Err - a
Following error (theoretical trajectory).
Limit switch e
ERROR
This message is indicated when a calculation is
impossible, or would create out
an axis is told to move beyond its authorized limits).
This information is followed by a return to
mode
and the cursor positions itself automatically over the field
to be corrected.
message
indicates that the data received are not valid, and thus
EXECUTED
,
Indicates that the product or tool number chosen for
FREE
Displayed in
ERROR
In the case of a transmission exterior ->DNC, this
impossible to read.
The DNC has made the calculation correctly (corrections
transformations, etc.).
EXISTS
storage already exists.
mode when the buffer is empty (no
PAGE 74 USER GUIDE DNC 600S
To Next Page
Loading...
