INTERNAL RESTORE OF PMS AND TOOLS
This functionality is to use only, in the event of problems, by the operator
request of the manufacturer.
The parameters restoration will replace the current co
last para
The too the sam
The tools which number as these in the backup a
affected by the re
Example: The s been saved.
The user has modified the data of the punches
on
of DNC by the
e number.
re not
1 and 2 and he has
he
ls.
The punches 12, 14 and 15 aren’t affected.
ers and tools, go in the TRANSFER RS232
ntents
meters backup (generally by the manufacturer).
ls restoration will replace all tools data which have
have a different
storation.
punches number 1 and 2 ha
added the punches 12, 14 and 15.
At the moment of the restoration, the value of the data of t
punches 1 and 2 will be replaced by these of the saved too
Only the last compatible backup can be restored.
For restore the machine paramet
page from the main menu.
DNC <-> PC STATUS
TRANSFER 1 1, 2 Cyback
3,4 TEST LIAISON 1 2
7 FLASH
8 EXT KEYBOARD
11 INTERNAL BACKUP
12 INTERNAL RESTORE
Quantity of free backup memory 93 %
-- RS232 PARAMETERS --
Baud rate 57600 Stop 1.0
Parity odd (1) EVEN (0) _ Bits 8
• Select 12 INTERNAL RESTORE
PAGE 100 USER GUIDE DNC 600S
To Next Page
