EASY BEND PAGE
The EASY BEND page is accessible by hitting the
key twice.
.
Easy Bend
Th: 2.00 σ 45.00 Kg/mm2 Ac_Al_In_
p/d 1/1 CR __/ri 2.78
--MEM-- --POS-- --COR--
90.0° mes __._°
Y1 293.11 350.92
Y2 293.11 351.05
L 136.0
X1 133.9 51.8
Lp 5000 Fp 78
Rx ___ Start Ext _
Vy __% __% ΔTp _._s
PCV ___
Material thickness
This page makes it possible to quickly programme a bend, and/or briefly stop
production to perform a single bend without modifying or losing data in the
production programme.
Online
Help
PROGRAMMING A BEND
Enter the thickness and the tools if they differ from the product in the
course of production.
To speed up programming, the p/m fields as well as the material are
taken over from sequence 1 of the product currently in hand. The
modification of these data does not affect the programme that is running.
Enter the angle of the bend in the
field
Enter the height
L of the wing (external measurement) and the position of
the X gauge will be calculated automatically.
or
directly enter the distance at which the X
gauge is to be positioned.
L
Enter the length of the bend.
The system automatically calculates the pressure and bending.
Possibly also enter,
o how long the pressure is to be maintained (if not
programmed, the default is = 0.5 s),
o the retraction of the gauge,
o the reduction in bending speed,
o slow lifting, etc.
PAGE 6 USER GUIDE DNC 600S
To Next Page
Loading...
