GAUGE AXES
The addition of supplementary axes (to X) does not present any difficulties
for the operator, the fields being clearly defined on the screen.
The safety factors concerning the supplementary axes such as R, X1, X2, Z1
and Z2 are described below.
X-R Safety Factors
When the R axis is a digital axis, an anti-collisi
posi g of the gauge prob
A saf one encircling
when robes position
The zone encircling the die is
mac arameters, and are defined
The zone where all positioning is p
on safety factor prohibits the
tionin es in the die.
ety z the die provokes a particular type of positioning
the p themselves in this zone.
safety defined by the data introduced in the
hine p by the manufacturer.
rohibited, is defined using the values
troduced for each set of tools. in
1 Safety zone
2 Prohibited zone
3 Value Safety die X parameter 50
4 Value Safety die R parameter 50
APPENDIX G: MISCELLANEAOUS PAGE 61
To Next Page
Loading...
