WORKING MODES
Programming mode
Allows to introduce, modify and read data as
well as to store, search for and transfer
programs.
Manual mode
Authorizes axis movement and auxiliary
functions using the
keys.
Semi-automatic mode
Allows a machine cycle with the current
sequence values without automatic sequence
change.
This mode is used for adjustments when
realizing the first product, as well as for
products with only one bend.
The sequence change is made using the
keys.
NB: The product counter Q does not function
in this mode.
Automatic mode
Normal mode for product production.
The DNC automatically changes sequence
after each bend.
Changing directly from "programming" mode
automatically forces the first sequence of the
program.
Changing from "programming " mode to
"semi-automatic" mode and then to
"automatic" mode, conserves the current
sequence for execution.
This allows to take up again a product in
production without having to make "empty"
cycles.
PAGE 26 USER GUIDE DNC 600S
To Next Page
Loading...