28
2. Advanced Power Management
Intelligent PDU Web Interface
2.5.1.2 SNMP Trap Notification
Set up to 10 SNMP trap receivers to be notified when an event occurs. See System
> Notification > Trap Receivers.
System > Notification > Trap Receivers
Item Definition
Name
Click on the trap name to enter the Configure Trap Receiver
Page.
Users can
modify or delete an existing receiver.
TEST Click this button to
check if the trap can be sent.
New Receiver
Click this button to enter the Add New Trap Receiver Page.
Users can add a new recipient.
To Next Page
Loading...
Need help?
General
