44
3.
Intelligent PDU Web Interface
3.4 Wake on LAN (WoL)
When turning on an outlet, a Wake on LAN packet can be sent to the connected
computer to awaken it. It is necessary for the computer to support this function and is
configured as "Enabled" in its BIOS settings. See PDU Tab > Wake on LAN > Features
and PDU Tab > Wake on LAN > Lists. (For Switched Metered by Outlet Series and
Switched Series only.)
PDU Tab > Wake on LAN > Features
Item Definition
PowerPanel
Client
Load/Sync with PowerPanel Client List. To achieve
synchronization, make sure the PDU has established
communication with PowerPanel® Business Edition Client
software. See
System Tab > Security > Authentication.
Wake Conditions Enable or disable the Wake on LAN
function.
To Next Page
Loading...
Need help?
General
