CyberPower PDU31 Series User Manual

72
5. Network Service
Intelligent PDU Web Interface
5.6 Console Service
Select the Enable options to allow access using Telnet/SSH service and configure
Telnet/SSH port settings. See System Tab > Network Service > Console Service.
System Tab > Network Service > Console Service
Item Definition
Access
Allow Access
Enable access using
Telnet or SSH version 2, which transmits
user names, passwords, and data in an encrypted format.
Telnet Settings
Telnet Port
The TCP/IP port that Telnet uses to communicate; 23
is the
default value.
Users can change the
port setting to any unused port from
5000 to 65535 to enhance security.
Note: Telnet Client requires users to enter a space and the port
number after the PDU IP address on the command line to access
the control console.
SSH Settings

CyberPower PDU31 Series Specifications

General

Brand	CyberPower
Model	PDU31 Series
Category	Power distribution unit
Language	English