CyberPower PDU31 Series User Manual

73
5. Network Service
Intelligent PDU Web Interface
Item Definition
SSH Port
The TCP/IP port that SSH uses to communicate; 22 is the default
value.
Users can change port setting to any unused port from 5000 to
65535 to enhance security.
Hostkey Status
Display the status of hostkey fingerprint to show whether it is
valid or invalid.
Click Upload Hostkey to upload or change hostkey.
Hostkey
Fingerprint
The hostkey fingerprint uploaded by users will be displayed in
this field.

CyberPower PDU31 Series Specifications

General

Brand	CyberPower
Model	PDU31 Series
Category	Power distribution unit
Language	English