38
3. Outlet Management
Intelligent PDU Web Interface
Item Definition
Reboot
Selected outlets will be immediately turned off and then be
turned on again according to each outlet’s Reboot Duration
in
PDU Tab > Manager > Outlet
.
Reboot + Delay
S
elected outlets will be turned off according to each
outlet's Power Off Delay. T
hey will be synchronized with
the longest Power Off Delay and the longest Reboot
Duration of the selected outlets. Then they will
on according to each outlet's Power On Delay in
PDU Tab >
Manager > Outlet
.
Cancel Pending
Command
Any pending commands of the
selected outlet(s) will be
cancelled. Any outlet in a pending command state will be
notated with an asterisk (*).
Outlet Selection Outlets selected for action.
To Next Page
Loading...
Need help?
General
