Cybex 750T Treadmill Owner’s Manual
Safety
Page 1-7
NOTE: When not in use store the e-stop clip on the storage tab located on the lower cover. See Figure 3.
The 750T Treadmill has two CSAFE ports, one in the console for CSAFE devices that need access
there, and one under the base of the unit for running a network connection.
NOTE: The CSAFE standard defines a communication protocol and low-voltage DC power source
specific to the Fitness Equipment Industry. These RJ-45 phone jacks are provided for use ONLY
within the CSAFE protocol. For more information on the CSAFE standard, visit
www.fitlinxx.com/csafe. Not every connection carries both the communication and power
capability.
NOTE: The console CSAFE port inside the console contains the full implementation, with both network
communications and a standard CSAFE voltage (minimum 8.0 VDC) power source. The base
CSAFE port is accessible under the base of the treadmill and is for network communications
only and does not contain the DC power source. See Figures 4 and 5.
Console CSAFE Port Location
CSAFE Ports
CSAFE Port
(Lower Socket)
Figure 4
Figure 3
Clip
E-Stop
Storage
Tab
Lower
Cover