CYBEX 750T Owner's Manual

Cybex 750T Treadmill Owner’s Manual
Assembly
and
Setup
Page 2-13
Sound (TONE - ON/OFF):
This option will enable or disable the beeper by toggling it on/off. Default is On.
Dormant Display Option (DORMANT STYLE):
This defi nes what is displayed in Dormant mode. Valid Choices for Dormant Display are:
0 – DEFAULT -
1 – TEXT MSG - Not Applicable.
2 – OUT OF ORDER - Out of Order message.
3 – CLOCK - Time clock.
4 – PROFILES - Displays program profi les.
Lock Combination (LOCK CODE).
This feature will allow the Lock Combination (PIN) to be changed. It requires the correct PIN number to
be entered fi rst before allowing any changes.
The PIN numbers will be entered using the keypad. If an incorrect PIN number is entered, the number will
blink once and revert back to underscores. If a valid PIN number is entered, blink the ON or OFF (default)
text (whichever was previously stored) and allow the Speed Control Key to toggle it.
Custom Programs - (SAVE PROGRAM).
The ability to SAVE a workout session as a custom program during Review is enabled or disabled here.
If disabled, the SAVE button will not be active during Review. The text area will display Save Program
On or Save Program OFF (default).
Remember: You must press Enter after changing a value for that value to be stored.
3. To exit Set Up Mode press the Stop key once.
Your treadmill is now ready for use. Follow the instructions in the Operation chapter to learn how to operate
the treadmill. You should begin with walking speeds first, to be sure everything is functioning properly.

CYBEX 750T Specifications

General

Motor	3.0 HP
Incline Range	0% - 15%
Max User Weight	400 lbs
Heart Rate Monitoring	Wireless Receiver
Weight	350 lbs