CYBEX 770T Service Manual

Determine Audio Visual Configuration
Determine which audio visual configuration you have.
Embedded TV setupPersonal TV setupShared TV setup
TV embedded in product. The
product uses the E3 View Monitor.
Personal TV on a stand. TV is
controlled with a C.A.B. (Console
Adapter Box) or C-tv (Connected
TV) connect to the product.
Shared TV's on wall or hanging
from ceiling. Audio is sent to
product via wireless transmitter.
See Embedded TV SetupSee Personal TV SetupSee Shared TV Setup
A/V setup mode
Falling hazard. When starting unit
• Stand on two top steps.
• Do not stand on belt.
1. Plug the power cord into a power outlet from a grounded, dedicated circuit as described under
Electrical Requirements in this chapter. Do not stand on treadmill during this procedure.
2. Ensure the power cord is not being pinched under the front of the treadmill.
3. Toggle the power switch on (|). Power switch is located under the front end of the treadmill. The
control panel will light up and be in the Dormant Mode.
Press and hold Cybex logo for 6 seconds to ac-
cess Screen Lock and Toolbox.
CYBEX LOGO
Press and hold language logo for 6 seconds to
access Screen Lock and Toolbox.
LANGUAGE ICON
4. Tap the Access Toolbox icon to display the Access to Toolbox login screen.
5.
Enter the sequence: .
6. Tap Setup at the main Toolbox screen.
7.
Tap the Shift Right icon to navigate to the TV Source icon.
8. Tap TV Source.
Page 36 of 261
Cybex 770T/790T Treadmill Part Number

CYBEX 770T Specifications

General

Weight Capacity	400 lbs
Speed Range	0.5 - 12.4 mph
Incline Range	0 - 15%
Running Surface	22" x 60"
Heart Rate Monitoring	Yes
Display	15" Touch Screen