Cygnus 4 Operating Manual
If you want to change or select
the item currently displayed
simply press the green Ok/Select
Then use the Navigation keys to
highlight the required setting or
option
Press the green Ok/Select key to
Or press the red X/Cancel key to
Press the Left key to go back to
the main group if you want to
make another selection
To exit the menu press the Menu
or red X/Cancel key once.
Settings are Saved with the Probe Type
Certain gauge settings are saved against the probe type. This
allows each probe type to have different settings that will be
recalled when that probe is re-connected and the probe type is
correctly set. The following settings are saved with each probe
type;
To Next Page
Loading...
Need help?
General
