DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
3
Ports
• Twenty-four high-performance (MDI-X/MDI-II) ports for connecting to end stations, servers, hubs and other
networking devices.
• All UTP ports can auto-negotiate between 10Mbps and 100Mbps, half-duplex and full duplex, and feature flow
control.
• Two 1000BASE-T Mini-GBIC combo ports for connecting to another switch, server, or network backbone.
• RS-232 DCE Diagnostic port (console port) for setting up and managing the Switch via a connection to a
console terminal or PC using a terminal emulation program.
NOTE: For customers interested in D-View, D-Link Corporation's
proprietary SNMP management software, go to the D-Link Website
(www.dlink.com.cn) and download the software and manual.
Front-Panel Components
The front panel of the Switch consists of LED indicators for power and for each 10/100 Mbps twisted-
pair ports, and two 1000BASE-T Mini-GBIC ports. The ports of the DES-3526 and DES-3526DC are
identical.
Figure 1- 1. Front Panel View of the DES-3526
The DES-3526DC does not support a redundant power supply; therefore the RPS indicator does not
appear on the front panel.
Figure 1- 2. Front Panel View of DES-3526DC
Comprehensive LED indicators display the status of the Switch and the network.
To Next Page
Loading...
