Configuration D-Link Web Smart Switch User Manual
8
8
6
6
To define the IPv4 ACL Protocol ID profile, Select IPv4 ACL with Protocol-ID and click Select button. The
following window displays:
Figure 4.102 – ACL > Access Profile List > Add ACL Profile (IPv4 ACL Protocol ID)
The Add ACL Profile IPv4 Protocol ID contains the following fields:
IPv4 TOS: Select this option to include IPv4 type of service parameters in this profile.
DSCP – Select this option to use the DSCP field for IPv4 TOS.
TOS – Select this option to use the type of service (TOS) field for IPv4 TOS.
Precedence – Select this option to use the precedence field for IPv4 TOS.
Source IP Mask: Defines the range of source IP addresses, relevant to the ACL rules. (0=ignore, 1=check).
For example, to set 176.212.XX.XX, use mask 255.255.0.0.
Destination IP Mask: Defines the range of destination IP addresses, relevant to the ACL rules. (0=ignore,
1=check). For example, to set 176.212.XX.XX, use mask 255.255.0.0.
Click Add button to add the ACL profile. Click Back to go back to the previous window.
To define the IPv6 ACL ICMP profile, Select IPv6 ACL with ICMP and click Select button. The following
window displays:
To Next Page
Loading...
