Configuration D-Link Web Smart Switch User Manual
8
8
7
7
Figure 4.103 – ACL > Access Profile List > Add ACL Profile (IPv6 ACL ICMP)
The Add ACL Profile IPv6 ACL ICMP address window contains the following fields:
IPv6 Class: Tick this option to include the IPv6 class field.
Source IP Mask: Defines the range of source IPv6 addresses, relevant to the ACL rules. (0=ignore,
1=check).
Destination IP Mask: Defines the range of destination IPv6 addresses, relevant to the ACL rules. (0=ignore,
1=check).
ICMP Type: Sets the ICMP Type field as an essential field to match.
ICMP Code: Sets the ICMP code field as an essential field to match.
Click Add button to add the ACL profile. Click Back to go back to the previous window.
To Next Page
Loading...
