Device Configurations
The Device Configurations in the SmartConsole Utility has five icons:
Device Settings
Device Password Manager
Firmware Upgrade
DHCP Refresh
Web Access
and the , , device buttons for the Device List.
Device Settings
Select a switch from the Device List, then clicking on this icon the Device Settings window will pop up. Here
you can configure the Product Name, IP Address, Gateway, Subnet Mask, System Name, Location, Trap IP,
Switch Group Interval, and DHCP Setting of the Switch.
To apply the configuration, insert the correct device password in Confirm Password then click OK
Figure 22 – SmartConsole Device Settings
To Next Page
Loading...
Need help?
General