D-Link DIR-890L - Primary and Secondary 5 Ghz

53D-Link DIR-890L User Manual
Section 3 - Conguration
Primary and Secondary 5GHz
Enable or disable the wireless frequency band.
Create a Wi-Fi Name for your wireless network using up to 32
characters.
Create a Password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Select None, WEP, or WPA/WPA2-Personal (recommended).
Select the preferred wireless networking standard for each band.
The available options will depend on the wireless frequency band,
as well as the currently selected security mode.
Select the desired channel. The default is Auto (recommended).
Select the desired wireless transmission power (High, Medium or
Low).
Select Auto 20/40/80 MHz if you are using 802.11ac, 802.11n, and
non-802.11n wireless devices, or select Auto 20/40 MHz if you are
using both 802.11n and non-802.11n wireless devices.
Status:
Wi-Fi Name
(SSID):
Password:
Security Mode:
802.11 Mode:
Wi-Fi Channel:
Transmission
Power:
Channel Width: