D-Link DIR-890L - Quickvpn

71D-Link DIR-890L User Manual
Section 3 - Conguration
QuickVPN
The QuickVPN feature is a fast and easy way to create a prole for secure remote access to a Local Area Network (LAN). This prole can be used to
congure other devices to connect to your LAN via a secure VPN tunnel.
From the Features menu, click Quick VPN. Click Advanced Settings... to expand the list and see all of the options.
Enable to allow QuickVPN access to your network.
Enter a Username of your choice.
Enter a Password of your choice.
Enter a pre-shared key (PSK). Clients attempting to connect to your
network through a VPN will need to enter this key.
iOS users can quickly and easily establish a VPN (Virtual Private
Network) using a VPN conguration le. Click Save to export these
settings as a VPN prole, allowing anyone with the le to connect
to your network on an iOS device.
Select either MSCHAPv2, PAP (Password Authentication Protocol),
or CHAP (Challenge-Handshake Authentication Protocol).
Select either None, RC4-40, or RC4-128 (encryption).
Click Save when you are done.
L2TP over
IPSec:
Username:
Password:
PSK:
Save
Conguration
To Local Hard
Drive:
Authentication
Protocol:
MPPE: