D-Link DSL-226 - Settings; Wizard; Internet

30D-Link DSL-226 User Manual
Section 4 - Conguration
Settings
Wizard
Internet
To access the Setup Wizard page, go to Settings > Wizard. This is the same wizard that appears when you start the router for
the rst time. Refer to Setup Wizard on page 15 for more information.
The following pages will describe how to connect your DSL-226 to the
Internet. To access this page, go to Settings > Internet at the top of the page.
The DSL-226 supports multiple WAN connection types. We recommend that
you set up Internet WAN connections one at a time, save the conguration,
and conrm the connection works before returning to this section to add
additional WAN connections.
Dierent WAN access types are described in the following sections.
WAN CONNECTION TYPE
Congure your
WAN Connection:
Select the WAN interface to congure. The options are ADSL, VDSL
and Ethernet.
Select a WAN Connection and refer to its conguration page for setup
information.
For ADSL, refer to Internet - ADSL on page 31.
For VDSL, refer to Internet - VDSL on page 33.
For Ethernet, refer to Internet - Ethernet on page 34.