89D-Link DSL-226 User Manual
Section 5 - Connect and Share a USB Device
Accessing from File Explorer on Windows
Step 1 - Enable network discovery on Windows:
Go to Control Panel > Network and Internet > Network and
Sharing Center and select Change advanced sharing settings on
the left.
Step 2 - Network sharing settings can be congured dierently for dierent
network proles. Select Turn on network discovery for your
private network or choose the desired network. Also select Turn
on automatic setup of network connected devices.
Step 3 - Enable media streaming:
Go back to the previous menu and select Media streaming
options. Click Turn on media streaming if it says that Media
streaming is not turned on.
Note: It is required that all of your devices are connected to the same wireless
network as the DSL-226.
To Next Page
Loading...
Need help?
General
