D-Link DSL-226 User Manual

74D-Link DSL-226 User Manual
Section 4 - Conguration
Management
Time
The Time page allows you to congure, update, and maintain the correct time
for the internal system clock. From here you can set the time zone and the
Network Time Protocol (NTP). To access this page, go to Management > Time
& Schedule.
Auto Sync
Network Time
Server:
Enable or disable automatic synchronization of the date and time
with a Network Time Protocol (NTP) server.
Auto Sync Time
Zone:
Enable or disable automatic time zone selection. If this is disabled,
select your time zone in the following Time Zone drop-down list.
System
Date&Time:
Displays the current system date and time.
Select Interface
Select the interface for network time communication.
NTP Server/2
Address:
Select the NTP server address from a list of available NTP servers. If
you selected Other, enter the NTP server in the eld. Adding a second
server is optional. Select None if you don't want to specify a backup
NTP server.
Time Zone
Select the router's time zone from the drop-down list.
Click Save when you are done. To congure and manage the schedule, click
the Schedule tab and refer to Schedule on page 75.
Time & Schedule

D-Link DSL-226 Specifications

General

Brand	D-Link
Model	DSL-226
Category	Network Router
Language	English