D-Link DSL-226 User Manual

56D-Link DSL-226 User Manual
Section 4 - Conguration
Radvd Mode: Select the mode for RADVD: Auto or Manual. If selecting Manual, enter
the IPv6 prex conguration manually.
RA Flags
Set:
Congure both ManagedAddr and OtherCong. Set it to on so the
router allows clients to obtain an IPv6 address automatically when
a DHCPv6 service is available. ManagedAddr incorporates DHCPv6
address information while OtherCong incorporates information
other than DHCPv6 address.
DHCP6 Server: Enable or disable DHCPv6 service.
DHCPv6 Mode: Select the prex assignment method: Auto or Manual.
If you selected Manual for RADVD, congure the following settings:
Prex/Length: Enter the IPv6 prex, for example, 3e:501::100::/IPv6 prex length
(16-64).
Prex Preferred
Lifetime:
Enter the preferred lifetime of the prex (300-4294967295 seconds)..
The default is 3600.
Prex Valid
Lifetime:
Enter the valid lifetime of the prex (300-4294967295 seconds). The
default is 7200.
If you selected Manual for DHCPv6 Mode, congure the following settings:
Prex/Length: Enter the IPv6 prex, for example, 3e:501::100::/IPv6 prex length
(16-64).
Prex Preferred
Lifetime:
Enter the preferred lifetime of the prex (300-4294967295 seconds)..
The default is 3600.
Prex Valid
Lifetime:
Enter the valid lifetime of the prex (300-4294967295 seconds). The
default is 7200.

D-Link DSL-226 Specifications

General

Brand	D-Link
Model	DSL-226
Category	Network Router
Language	English