Web Configuration
D-Link DSL-2600U User Manual
29
ADSL BER Test
Click ADSL BER Test to perform a bit error rate (BER) test on the DSL line. The test page
is as follows.
The Tested Time (sec) can be 1, 5, 10, 20, 60, 120, 180, 240, 300, or 360. Select a time
and click Start. The following pages appear.
Note: If the BER reaches e-5, you cannot access the Internet.
Route Table Information
Click Route, and if the system is in the default configuration, the following page appears.
If the configuration of modem is as PPPoE/PPPoA dial-up, the page shows different.
To Next Page
Loading...
