Installing the Router
Connect the ADSL Line and Telephone
Connect your phone cable between the DSL port of the router and the
MODEM
port of the splitter. Connect your phone to the
PHONE
port of the
splitter. Then connect another phone cable between a phone jack and the
LINE
port of the splitter
NOTE:
See
connections
on
the
installation
diagram.
Connect
the
PC
to
the
Router
Power off your PC.
Connect an Ethernet cable between the Ethernet port located on
the back panel of the router and the Ethernet port of your PC .
Connect
the
Power
Adapter
Connect the power cord to the power connector port on the back
panel of the router, then plug the power adapter into an electrical
outlet or power strip.
6
To Next Page
Loading...
