D-Link DSL-2700U - Advanced Qos Setup

MSN Messenger
Select QoS setup based on MSN Messenger.
Start Port
Enter the start port number for QoS setup based on four different select
able
options in this screen.
End Port
Enter the end port number for QoS setup based on four different select
able
options in this screen.
When you are making changes, click on Save Settings to save your
changes.
Advanced QoS Setup
When you click the button labeled Wireless QoS, you will be displayed
the screen following.
The following table describes the labels in this screen.
LABEL DESCRIPTION
Traffic Class Name Enter a traffic class name you wish to use.
Wireless Transmit Priority Select a wireless transmit priority from the drop-down list.
Source IP Address Enter a source IP address.
Source Subnet Mask Enter a source subnet mask.
Destination IP Address Enter a destination IP address.
Destination Subnet Mask Enter a destination subnet mask.
UDP/TCP Source Port Enter a UDP/TCP Source Port.
UDP/TCP Destination Port Enter a UDP/TCP Destination Port.
29