devices. An UPnP device can dynamically join a network, obtain an IP
address, convey its capabilities and learn about other devices on the
network. A device can leave a network smoothly and automatically
when it is no longer in use.
The following table describes the labels in this screen.
LABEL DESCRIPTION
Enable UPnP Toggle the status of UPnP enable or disable.
When you are making changes, click on Apply Settings to save your
changes and Cancel to exit without saving.
Multicast Streams
The following table describes the labels in this screen.
LABEL DESCRIPTION
Enable Multicast Stream Toggle the multicast stream status enable or disable.
When you are making changes, click on Apply Settings to save your
changes and Cancel to exit without saving.
Remote Management
Remote Management Settings
45
To Next Page
Loading...
