Destination IP Range Enter the destination IP range and mask.
Destination Port Range Enter the destination port range.
When you are making changes, the ACTIVE LAN QOS RULES will
show the relevant information after you click on Add/Apply button.
The following table describes the labels in this screen.
LABEL DESCRIPTION
Name Show the name of active LAN QoS rule.
Priority Show the priority of active LAN QoS rule.
Protocol Show the protocol of active LAN QoS rule.
Src. IP Range Show the source IP range of active LAN QoS rule.
Src. Port Show the source port of active LAN QoS rule.
Dest.IP Range Show the destination IP range of active LAN QoS rule.
Dest. IP Port Show the destination port of active LAN QoS rule.
Remove Select the removed active LAN QoS rule.
Outbound Filter
The section allows you to create an outbound filter rule to change the
default all outgoing IP traffic from the LAN configuration.
Add Outbound IP Filter
31
To Next Page
Loading...
